Commercial structured cabling
Cat6 UTP patch panel
19-inch / 1U / 24 ports483 W × 44.2 H mm
- Body
- SPCC
- Termination
- T568A/B, 22–26 AWG IDC
- Contact
- RJ45 mating-cycle reference: at least 750
INFRASTRUCTURE SYSTEMS ● STRUCTURED CABLING
Copper Connectivity
24-port patch panels, keystone modules, plugs, cords and rack cable managers specified by category, shielding, port count, termination and channel-test requirements.
Cat5e / Cat6 / Cat6A range
24-port Cat6 reference
Component-level BOM
PRODUCT SCOPE
Select the copper components that belong in one BOM.
A patching system is built from separately specified panel, jack, cord and manager. Port count alone does not define a link.
Commercial cablingDistribution programsSystem integration
Compare the available formats ↗PRODUCT RANGE
Explore formats and details ↗FORMATS / TECHNICAL SPECIFICATIONS
Select the right configuration.
Physical specifications, supply details and application fit—organized for a faster technical comparison.
Mixed or phased rollouts
Empty 24-port panel
19-inch / 1U482.6 × 75.2 × 44.2 mm
- Body
- SPCC and ABS
- Module options
- Cat5e, Cat6 or Cat6A keystone mix
- Scope
- Category follows the installed module and channel design
Higher-port-density racks
Covered cable manager
19-inch / 1URack accessory
- Format
- Metal horizontal manager with cover
- Function
- Cord routing and service access
- Selection
- Match the cabinet, bend path and patch-cord density
Shielded copper channels
Shielded keystone option
180° terminationZinc-alloy housing
- Category
- Cat6A/Cat7 module formats listed
- Shielding
- Match cable, panel and channel components
- Installation
- Select the required wire gauge and termination method
SPECIFICATION CHECKPOINTS
Define the interfaces.
Category
Cat5e / Cat6 / Cat6A by exact component
Shielding
UTP or shielded system
Wiring
T568A/B and conductor gauge
Acceptance
Channel or permanent-link method, labeling and tests
APPLICATIONS / SELECTION PATHS
Where this family
fits the work.
Explore the application, product interface and configuration decisions that matter to the actual installation.
SPECIFICATION PATH
Commercial fit-out
Choose category and shielding, then set the patch-panel port count, module mix, cord lengths and labeling.
DECISIONS TO LOCKCategory · shielding · port schedule
KEY SELECTION DECISIONS
Reference panel
The documented starting point is a 19-inch, 1U, 24-port Cat6 UTP panel; other category and shielding combinations are selected separately.
Termination
The panel reference lists RJ45 keystone style, T568A/B and 22–26 AWG IDC range. Confirm exact jack and cable pairing.
Link validation
Pair the panel with category-matched modules and cords, then select the channel or permanent-link test method.
TECHNICAL DATA / SELECTION MATRIX
Copper patching component data
Physical panel, module, cord and manager details are specified separately to preserve the chosen channel category and installation plan.
Cat6 UTP 24-port panel
- Physical specification
- 19-inch, 1U; 483 W × 44.2 H mm; SPCC panel
- Termination
- RJ45 keystone style; T568A/B; 22–26 AWG IDC range
- Contact and handling
- Unshielded; published minimum 750 RJ45 mating cycles
Empty 24-port panel
- Physical specification
- 19-inch, 1U; 482.6 W × 75.2 D × 44.2 H mm; SPCC and ABS
- Termination
- Accepts category-specific keystone modules
- Contact and handling
- Cat5e, Cat6 and Cat6A module combinations by installed BOM
Covered cable manager
- Physical specification
- 19-inch, 1U metal horizontal format
- Termination
- Front cover and cord-routing space
- Contact and handling
- Match the rack and patch-cord density
!Select the category and shielding of each component. Installed-channel performance is evaluated using the requested link test method.
SELECT / VALIDATE
The quote changes with these choices.
Open each item for the engineering and documentation decisions that matter to this family.
Category and shielding+
Select Cat5e, Cat6 or Cat6A and UTP/STP to match the link design; do not mix category claims across parts.
Related parts+
Keystone jacks, patch cords, modular plugs, faceplates and 1U cable managers can be listed individually.
Acceptance evidence+
Specify the channel/permanent-link test method, wiring scheme, labeling and required batch documents.
FOR A USABLE RFQ
Send the details that define the order.
Send category, shielding, port count, cable/cord mix and quantity so each component can be priced against the same project BOM.
- Category and performance target
- Shielded or unshielded configuration
- Color and length mix
- Private-label packaging requirement
Have a copper port and category schedule?Start this RFQ ↗